Technical Information
Home > Technical Support > Technical Information
The Switch based on Z-WaveTM Slave library of V7.15.04. This Switch integrated Z-Wave communication module to connect with Z-Wave gateway.
The Switch can be included and operated in any Z‐Wave network with other Z‐Wave certified devices from other manufacturers and/or other applications. All non‐battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
The Switch is a security Z-Wave device (S2), so a security enabled controller is needed for take full advantage of all functionally for the Switch.
Features:
l Manual or Z-Wave on/off control with instant status updates.
l The Switch great for garage or gas fireplace automation.
l Installs behind your existing wall switch (single pole or 3-way).
l 700 series Z-Wave chip for better range and faster control.
l Scene control: trigger actions with multi-tap (select hubs only).
l Remembers and restores on/off status aer power failure.
l Built-in Z-Wave timer functionality and signal repeater.
l Works with LED and incandescent bulbs.
l SmartStart and S2 Security for a safer network.
1 Technical Specifications
|
Model Number |
Z-PRL1-V01 |
|
Communication Protocol |
Z-Wave |
|
Radio Frequency |
868.42MHz |
|
Wireless Range |
Up to 300 feet line of sight |
|
Input Voltage |
100-240V~,50/60Hz |
|
Maximum Load |
150W LED or CFL bulbs, 960W Incandescent, 10A Resistive |
|
Max Load Current |
10A |
|
Operating Temperature |
32-104° F (0-40° C) |
|
Operating Humidity |
Up to 85% non-condensing |
2 Z-Wave Specifications
|
SDK Version |
7.15.04 |
|
SDK Library |
libZWaveSlave |
|
Explorer Frame Support |
Yes |
|
Routing |
Yes |
|
SmartStart |
Yes |
|
Device Type |
Binary Switch |
|
Basic Device Class |
BASIC_TYPE_ROUTING_SLAVE |
|
Generic Device Class |
GENERIC_TYPE_SWITCH_BINARY |
|
Specific Device Class |
SPECIFIC_TYPE_NOT_USED |
|
Role Type |
Always On Slave (AOS) |